Automotive Q&A Community

The shop added a red stop point to the triage form. On the first case, the handoff included a freeze frame showing the fault only during DC charging a...

Power stayed at 12.2 V under command, ground drop was 0.08 V and the control signal was present. The blower started briefly when the housing was tappe...

Clean the upper engine first, then inspect the valve-cover perimeter—especially the rear corners and joints above the exhaust side—along with the cam-...

The belt was still dry, so the car went directly to the repair rather than staying in service. The housing gasket was the confirmed source. We cleaned...