Tag smoke leak detector

How to Pressure-Test and Smoke-Test an EVAP System with AUTOOL SDT206

Use AUTOOL SDT206 Air Mode to establish EVAP pressure and flow behavior, then Smoke Mode to localize the leak without overpressurizing the system.

Set up the compact MRCARTOOL T80 with its exact controls, verify smoke before connection and separate temporary-fixture leakage from a vehicle leak.

Set up the MRCARTOOL T105, use its flow meter deliberately, seal round or irregular ports and separate a fixture leak from a vehicle leak.

Set up the MRCARTOOL T100, pre-check an automotive circuit with air, introduce smoke safely and separate a test-connection leak from a vehicle leak.

Choose a smoke machine by system, permitted pressure, flow feedback and portability—not by maximum pressure or smoke density alone.

A detailed guide to setting up the FXTUL F803, reading pressure and continuing flow together, tracing the first smoke exit and verifying a repair.

A detailed two-phase guide to using the FXTUL F703 pressure gauge and smoke output to test one controlled low-pressure path and verify a repair.

A detailed guide to filling, sealing, powering and using the FXTUL F603 to trace a visible smoke exit and verify a repaired low-pressure path.