How to Use the AUTOOL CT200 Fuel Injector Cleaner and Tester
Clean and test compatible standard gasoline port injectors with the AUTOOL CT200: keep both fluid circuits separate, compare matched results and close at stable zero pressure.
Tag fuel injector testing
How to Use the AUTOOL CT60 Fuel Injector Signal Generator
Set up and use the AUTOOL CT60 fuel injector signal generator safely: verify compatibility, connect the harness, choose mode, set time and simulated RPM, observe, and shut down.
How to Use the AUTOOL CT500 GDI Fuel Injector Cleaner and Tester
Use the AUTOOL CT500 step by step: identify injectors, select the exact fixed voltage, clean without heat, prove the fixture dry, compare six results, and shut down safely.
How to Use the AUTOOL CT450 Heated GDI Fuel Injector Cleaner and Tester
Use the AUTOOL CT450 step by step: identify injectors, select the exact fixed voltage, heat and clean safely, leak-test, compare six spray and flow results, and shut down.
How to Use the AUTOOL CT400 GDI Fuel Injector Cleaner and Tester
Use the AUTOOL CT400 step by step: identify compatible GDI, EFI or FSI injectors, select the specified drive voltage, clean, leak-test, compare spray and flow, and shut down safely.
How to Use the AUTOOL CT160 Fuel Injector Cleaner and Tester
Use heated ultrasonic cleaning safely with the AUTOOL CT160, then mount, leak-test, compare spray and flow, retest under matched conditions, and shut down correctly.
How to Use the AUTOOL CT150 Fuel Injector Cleaner and Tester
Clean and test standard gasoline injectors with the AUTOOL CT150: fluid separation, rail setup, leakage, spray-pattern and flow checks, matched retesting, and stop conditions.