How to Use the AUTOOL AST603 Brake Fluid Bleeder
Use the AUTOOL AST603 brake fluid bleeder with exact vehicle data: prime off the vehicle, control the fluid supply, close every bleeder and disconnect at stable zero.
Tag English
How to Use the AUTOOL CT200 Fuel Injector Cleaner and Tester
Clean and test compatible standard gasoline port injectors with the AUTOOL CT200: keep both fluid circuits separate, compare matched results and close at stable zero pressure.
How to Use the AUTOOL CT80 Ultrasonic Cleaning Machine
Use the AUTOOL CT80 ultrasonic cleaner safely: confirm compatibility, load and fill the tank, set time, use optional heat, monitor, isolate and close out.
How to Use the AUTOOL CT60 Fuel Injector Signal Generator
Set up and use the AUTOOL CT60 fuel injector signal generator safely: verify compatibility, connect the harness, choose mode, set time and simulated RPM, observe, and shut down.
How to Use the FXTUL F803 Smoke Leak Detector
A detailed guide to setting up the FXTUL F803, reading pressure and continuing flow together, tracing the first smoke exit and verifying a repair.
How to Use the FXTUL F703 Smoke Leak Detector
A detailed two-phase guide to using the FXTUL F703 pressure gauge and smoke output to test one controlled low-pressure path and verify a repair.
How to Use the FXTUL F603 Smoke Leak Detector
A detailed guide to filling, sealing, powering and using the FXTUL F603 to trace a visible smoke exit and verify a repaired low-pressure path.
How to Use the FXTUL M7 Motorcycle Diagnostic Tool
A detailed guide to choosing the correct FXTUL M7 adapter and scan route, preserving reports, screenshots, events and logs, and verifying a motorcycle repair.
How to Use the FXTUL M4 Motorcycle Diagnostic Tool
A detailed guide to choosing the correct FXTUL M4 kit, preserving pre-clear motorcycle scan evidence, investigating one control unit and verifying the repair.
How to Use the FXTUL M3 Motorcycle Diagnostic Tool
A detailed guide to qualifying the correct FXTUL M3 kit, preserving pre-clear motorcycle scan evidence, investigating one control unit and verifying the repair.